Packard 2 Pole Contactor (24V, 30 Amp)
Embedded Files
3 Pole Contactor (24V, 30 Amp)
C330A3 Pole Contactor (24V, 40 Amp)
C340AContactor Type Definite Purpose FLA Inductive Amps 30 FLA Resistive Amps 50 Number of Poles 3 Coil Voltage 24 Coil Hz 50/60 Lug or Screw Terminal Box Lug Standards UL Number of QC Terminals Per Pole 6
Item #: 17335
Contactor Type Definite Purpose FLA Inductive Amps 40 FLA Resistive Amps 50 Number of Poles 3 Coil Voltage 24 Coil Hz 50/60 Lug or Screw Terminal Box Lug Standards UL Number of QC Terminals Per Pole 6
Item #: 17435
Relays control circuits through a low-power signal. An electro-magnetic current actuates the relay, creating a closed circuit within the device. General purpose relays are used in applications including HVAC systems, standby power supplies and telephone exchanges.
Features:
Features:
Class B insulation system
.250" QC terminals
Multi-positional mounting
UL 508 File No. E227250
Double make contact configuration
DPDT Heat Sequencer (1 Timing, 2 Switches, 30-90 On)
Features:
Timings: 1
Switches: 2
Resistive (Non-Inductive) at 480 VAC Watts: 6000
Motor Ratings (Inductive) at 120 VAC Full Load: 10.0A
Timings - Off M7-M8: 1-30
Pilot Duty at 120 VAC: 125VA
Resistive (Non-Inductive) at 480 VAC Amps: 12.5
Timings - Off M5-M6: 1-30
Motor Ratings (Inductive) at 480 VAC Locked Rotor: 18.0A
Timings - On M5-M6: 30-90
Timings - On M7-M8: 30-90
Motor Ratings (Inductive) at 240 VAC Full Load: 5.0A
Motor Ratings (Inductive) at 240 VAC Locked Rotor: 30.0A
Resistive (Non-Inductive) at 120 VAC Amps: 25
Resistive (Non-Inductive) at 240 VAC Watts: 6000
Motor Ratings (Inductive) at 480 VAC Full Load: 3.0A
Motor Ratings (Inductive) at 120 VAC Locked Rotor: 60.0A
Resistive (Non-Inductive) at 240 VAC Amps: 25
Resistive (Non-Inductive) at 120 VAC Watts: 3000
Pilot Duty at 240 VAC: 125VA
Pilot Duty at 480 VAC: 480VA
Type: DPDT
1/4” quick connect terminals
Used for switching solenoids, fan motors, and other applications.
Report abuse